products

Vacuum Bubble® Technology Aerator

The Vacuum Bubble® Technology Aerator 300 is ideal for mid sized CAFO facilities, small to medium sized municipal sewage processing sites, and portable sewage treatment modules. This unit has a floatation platform available as an option.

VBT™ 300 Specifications

Cubic Feet/Minute(Air) 5.0 VBT Model 300
Model Diagram
Cubic Feet/Day (Air) 7,200
Lb. O2/Day 132
Lb. O2/Hp/Hour 5.5
Approximate Flow (Gal/Day)
@ 300 PPM BOD5
26,000
   
A:    Motor Diameter 7.3"
B:  Motor Height 10.12"
C:   Motor Mount (Square) 12.0"
D:   Air Tube Length 22.5"
E:   Air Tube Diameter 8.5"
F:    Min Water Line 6.0"
G:    Max Water Line 16.0"
   
Motor - WEG 1 Hp
Voltage 1 Phase
Full Load Amps
120/230
12.8/6.4

VBT™ 300 Installation PDF



Confined Animal Feed Operations (CAFO)

  • Waste Lagoon Treatment
  • Deep Pit Barn Treatment
  • Flush Water Treatment

Read More


Municipal Wastewater Treatment

  • Aeration Lagoons
  • Solid Waste Separation

Read More


On-Site Wastewater Treatment

  • Pre-Treatment
  • Aerobic Combustion

Read More



Advanced Aeration Inc.'s Vacuum Bubble® Aerators are built upon sound scientific principles and engineering practices. The bubbles are created under a partial vacuum and consequently, as they enter the water, the higher water pressure surrounding them causes them to collapse further. There are no other, documented aerators with bubbles as small as 0.25mm in diameter

Vacuum Bubble® Technology
and Aerobic Bacteria are great for
:

  • Conventional Waste Treatment
  • Aerobic Efficiency
  • Nitrification

Read More

| copyright © 2006-2009 Advanced Aeration, Inc. | All rights reserved. |