products

    “The perfect application
      for all septic systems.”

Vacuum Bubble® Technology Aerator

The Vacuum Bubble® Technology Aerator 200 is best used in applications with high strength waste from commercial operations such as RV and mobile home parks, small industrial sites, restaurants, etc. The VBT™ 200 Series is often used in conjunction with ATU's and Advanced Treatment Systems as an effective pretreatment to significantly lower BOD/TSS concentrations.

VBT™ 200 Specifications

Cubic Feet/Minute(Air) 1.25 VBT Model 200
Model Diagram
Cubic Feet/Day (Air) 1,800
Lb. O2/Day 32
Lb. O2/Hp/Hour 5.33
Approximate Flow (Gal/Day)
@ 300 PPM BOD5
6,500
   
A:    Motor Diameter 4.17"
B:  Motor Height/1 Phase 8.5"
C:   Motor Mount (Square) 6.5"
D:   Air Tube Length 22.0"
E:   Air Tube Diameter 4.5"
F:    Min Water Line 6.0"
G:    Max Water Line 16.0"
   
Motor - Franklin 1/4 Hp
Voltage 1 Phase
Full Load Amps
115
2.8


Confined Animal Feed Operations (CAFO)

  • Waste Lagoon Treatment
  • Deep Pit Barn Treatment
  • Flush Water Treatment

Read More


Municipal Wastewater Treatment

  • Aeration Lagoons
  • Solid Waste Separation

Read More


On-Site Wastewater Treatment

  • Pre-Treatment
  • Aerobic Combustion

Read More



Bioconversion Inc.'s Vacuum Bubble® Aerators are built upon sound scientific principles and engineering practices. The bubbles are created under a partial vacuum and consequently, as they enter the water, the higher water pressure surrounding them causes them to collapse further. There are no other, documented aerators with bubbles as small as 0.25mm in diameter

Vacuum Bubble® Technology
and Aerobic Bacteria are great for
:

  • Conventional Waste Treatment
  • Aerobic Efficiency
  • Nitrification

Read More

| copyright © 2005-2009 Advanced Aeration, Inc. | All rights reserved. |